Preserving the Value of Your Collection of Patches

Collecting items is a habit that people developed before and is still enjoying today. There just seem to be something that makes people happy just by surrounding themselves with their collection. Of course, the process of searching and acquiring is always fun. But that’s also when the challenge starts. As your collection grows, the more space gets required to keep them. The same goes when collecting patches. As it adds up, it becomes a necessity for you to know the best way you can store and protect your collection without losing its value.

Let Your Creativity Run Wild

So the question now is, how can you preserve the value of your collection without storing them away and out of your sight? The options are actually wide. At most, all you need is to take advantage of your creativity and incorporate your collection as you enhance your home interior. Below are just some great ideas you may consider and improve depending on your preference.

1. Framed Patch Displays

The most basic way you can make your patch collection as part of your interior is through using picture frames or display cases. You have three options here: aluminum sectional frames with Plexiglass, poster size frames or foam core board, the least inexpensive of all. No matter what you choose, select that offers enough space to avoid pressing the items on the case. Display cases for patch comes in table top or wall mount option.

2. Cork Board

This is an option worth considering if you are up for some DIY project. Just get a 2”x3” cork bulletin board and some shrink wrap for the materials. This size of cork bulletin board will let you fit about four rows of 7 patches. You can use a stapler to attach the patch on the board or use other safer means if you want. Once done in this phase, you can start wrapping the frame using the shrink wrap to provide protection for the items.

3. Patch Album

PatchesIn this option, you can treat your patch collection just like the pictures showing every happy moments of your life. There are even photo albums that are specifically created for these items. Once the items are arranged on the album, have it displayed where you can easily access it while still keeping it well-protected.

4. Art is Art: Decorate Your Schoolbag with Patches

For this option, you can use any color you prefer for the schoolbag – should be plain or at least, only has little design. But it would be best to choose black or navy for a better background. Your schoolbag will serve as your blank canvass, giving you all the freedom to decide on the design and what to make it look like. So plan the design well before starting.

5. Hide Rack Display

PatchThis is a suitable option if you are feeling that creative at the moment. A hide rack display functions just like any display frames. The only difference is, you will make the frame itself and practice what you learned during your Boy Scout years, like making hitches and knots. You will need dowels, cotton cord, bit and drill, synthetic suede leather and more to get the project done.

Some Tips to Get You Going

Whatever ways you choose to display your collection, it would be best to do away with pins, cellophane, staples, pins and masking tape. Using any of these materials will not help in preserving the value of your collection but only increase the risk of marking or staining them. If you are planning to display your patches on frames, make sure to mount them at eye level. It will also complement with your interior to create a theme when displaying the items.

Don’t forget to add at least a short description of the collection to make them more purposeful. Lastly, you want to make sure that your investment is displayed out of the sun. Patch displays that are exposed to the sun for a long period will bleach and ruin its colors. It is best to avoid displaying these items where there is too much traffic as well, especially if the items are framed.

Your patch collection is significant in several ways. It may be your means of expressing your personality or creativity. Or, each of the patches you have may be acquired from significant instances in your life. Regardless of the way you acquired them, you want to make sure that they are preserved well.Get more detail idea about collection of patches and their custom design application and how they are to be preserved by visiting patches4less.com. Keeping them organized and using one of the ideas mentioned is among the ways you can achieve and ensure of that.

What Everybody Ought To Know About Custom Lanyards

According to Wikipedia, the very first lanyards were used in France. There were known by the term “Laniere” which means a strap or thong apparatus. Later, these were called lanyards and were used by French soldiers to connect their whistles, swords or pistols. These cords were used in situations where there is a higher risk of losing the object, such as in the navy. A well-designed pistol lanyard can be removed easily and reattached by the user. At present, lanyards are used not just to hold a functional object, but a decorative item as well.

Types of Lanyards

There are four main types of custom lanyards: tube, beaded, cord and ribbon also known as flat. The materials used in making lanyards vary from cotton or polyester to metal beading. They vary in function from being a tool to hold an object to accessorize a military police officer’s uniform.

Purpose of Using Lanyards

The main purpose of using lanyards is to keep small items on hand and near to you, such as your employee ID, cell phone or keys. They are generally composed of a strap of some kind and at the bottom an attachment. However, there are different components you can use with them. The kind of cord or the components you purchase for your lanyard depend on where and how you intend to use the lanyard.

Components For Custom Lanyards

Straps

Custom LanyardsThe straps for custom lanyards are available in different forms. Those worn around the neck can be accessorized to create a beaded lanyard, holding an ID at the end. It can also be flat, made of woven nylon ribbons that are tough and can withstand constant use and tougher conditions. You can purchase lanyard straps with an organization or brand name or logo on them to display your support of something.  They can also be coiled or elastic, particularly if they are to used around the wrist.

Sliding Adjusters

It is a small piece of plastic or metal with one or two holes in it, that both sides of the strap pass through. To keep it in place, the hole is tight enough on the strap but still loose enough to enable you to adjust the tightness of the lanyard strap by sliding it down and up. Adjusters can come in the “bead” style, which has only one hole, and the double-barrel style, which has two separate holes.

Snap Hooks

It usually comes with a lanyard strap and is connected underneath the loop of the strap with a metal loop at the upper part of the snap hook. You can connect anything to the hook that is small and has a hole in, like an ID card with a hole punched through a key ring or the edge. To connect something to the snap hook, press the end of the overlapping opening and slip the edge of the ID card or the key ring through the opening.  Release the opening and allow it to snap shut.

Bulldog Clips

These clips are used to attach an ID card holder or an ID card to a lanyard strap. To use this, to open the jaws of the longer end squeeze the shorter end together. Place the hole in the holder or ID card in the opening and release the short end so that the jaws will spring back together. This clip has a metal loop found at the top, you can attach the bottom of the lanyard strap here.

These are only some of the components that you can use for your custom lanyards. Considering the versatility of these lanyards, exploring other options may lead you to other viable components.

Lapel pins: Manufacturing Methods

lapelpinsLapel pins have been around for centuries. They were first used during the height of the Civil War in the United States to distinguish members and officials belonging to the Union and the Confederates. It is not unlikely that lapel pins have developed and adapted newer forms of manufacturing methods over the years. With the demand to a more personalized and more price efficient and versatile design, manufacturers have adapted a number of methods that will suit every design and customization needs. This works to the advantage of every client who desires a specific look for their customized lapel pins.

Cloisonne

This is the oldest type of manufacturing technique. The pin is cut and the design is stamped, leaving recessed and embossed parts. Then the powdered color pigment taken from a Pantone color chart will be added to each area and the pin will be baked. Usually the pin will be baked every time a color is added. Shimmer and glitters can be added to the pigment. Just like the typical manufacturing process, the pin would be filed smooth if necessary and an epoxy coating will be added to protect the color.

Soft Enamel

Just like in cloisonee, the design is stamped unto the metal then the pin is cut. Instead of applying the powdered pigment, the color is injected into the recessed areas. Unlike cloisonee, the pigment will not have any substance so the embossed and recessed areas are apparent. A clear epoxy coating can be applied to make the pin appear smooth.

Diestruck

The outline of the design will be first used to cut the lapel pins from the copper or brass sheets then the design image is stamped on. The image will be created initially on a die. The pin is the plated with the desired metal and then polished. This method gives an engraved look.

Offset Digital Printing or 4-color Process

This complex technique is used to capture photographic designs. Therefore, there is often a surcharge when this method is used. The images are printed on the metal’s front face and then cut. Pantone colors are not used rather, CMYK printer colors.

Photo Etched

The design of the pin is etched unto the metal face of the pin with the use of an acid solution. It is then hand-painted, baked and then polish.

Silk Screen

Screen printed lapel pins are made by applying individual blocks of color on at a time using the silk screen method similar in making t-shirts. Then they will be baked and coated with a clear epoxy resin.

Attachment Methods

At the back of every lapel pin is an attachment that is usually just a pin and hinge. Today, various attachment methods are available.

Safety Clasp

This kind of attachment resembles a safety pin but it comes with a special plate to which the pin will be attached

Butterfly/Military Clutch

This attachment is commonly used in military. It composes of a separate round stopper that attaches to the pin. The round stopper has 2 small wings that are squeezed to detach itself from the needle behind the pin.

Magnetic Clasp

Magnetic clasps have 1 to 2 magnets behind the pin that attaches the pin to a separate metal plate or another magnet. This is suitable for people who do not want pinholes on their clothes. Magnetic clasp attachments are the priciest kind of attachment.

Jewelry Clutch

Just like the butterfly clutch, the jewelry clutch has a separate stopper. Jewelry clutches resemble earring stoppers.

Screw

A threaded bolt is attached to the back of the pin. This bolt will then be attached to a small separate screw.